I-3D Back Lighting Izinhlamvu Zokukhangisa Zensimbi Engagqwali Zidlule Uphawu Lwenombolo Yendlu Yezimpawu EzineLED
| Uhlobo | Uphawu lwe-Halo-lit |
| Isicelo | Uphawu lwangaphandle/Ngaphakathi |
| Izinto eziyisisekelo | #304 Insimbi Engagqwali |
| Qeda | Ibhulashi |
| Ukukhweza | Izinduku |
| Ukupakisha | Amakhreyithi Okhuni |
| Isikhathi Sokukhiqiza | 1 amaviki |
| Ukuthumela ngomkhumbi | I-DHL/UPS Express |
| Iwaranti | 3 iminyaka |
Uphawu lwezinhlamvu ze-Halo-lit uhlobo lophawu lwezinhlamvu ezikhanyayo ze-LED.Ezindaweni zasendlini, izimpawu ze-Halo-lit cishe zizodlulisela inani lomkhiqizo.Uphawu lwe-Halo-lit luvame ukusetshenziselwa uphawu lwangaphakathi ngoba ukukhanya kophawu lwe-Halo-lit kuthambile futhi akunonya.Ngokujwayelekile isetshenziswa ezitolo ezinkulu, izitolo ezikhethekile, udonga lwelogo yenkampani nezinye izindawo.
Inqubo yokukhiqiza uphawu lwe-Halo-lit:
1. Ukusika impahla: Ukuze kuqinisekiswe ukuthi ukuxhumana kophawu lwe-Halo-lit kubushelelezi, impahla kufanele inqunywe nge-laser ngokuphelele.Ukusika kwe-Laser kuyisicaba futhi ngaphandle kwama-burrs, futhi okulungele ukubhekana nezinhlamvu ezincane.Ngesikhathi esifanayo, impahla yesibonakaliso se-Halo-lit kufanele ikhethe insimbi engagqwali noma ishidi eliphekiwe elipendiwe.
2. I-Grooving: Kudingeka ukugebha imiphetho yensimbi ezungeze izinhlamvu futhi uvule inothi engu-0.6mm ukuze kube lula ukufakwa nokushisela kwe-Angle ye-stroke.
3. ukugaya okungaphezulu: Ngenxa yokuthi ipuleti lensimbi elibekwe isikhathi eside kulula ukuba lifakwe i-oxidized, alihambisani ne-laser welding, ngakho-ke kungcono ukupholisha kahle ngaphambi kokushisela.
4. I-Laser Welding: I-Laser Welding indawo yensimbi ephucuziwe kanye nomjikelezo.Ngenkathi i-welding, iphoyinti le-laser kufanele liqondaniswe ne-interface orientation, futhi ukunyakaza kwepuleti lensimbi akufanele kusheshe kakhulu ukugwema ukulimala.
5. Hlanganisa i-module ye-LED: Faka i-glue kuphawu lwezinhlamvu, bese uhlanganisa i-module ye-LED futhi uyilungise, bese igobolondo lezinhlamvu seliphelile.Naka ukungangeni kwamanzi: uma uphawu lwezinhlamvu ze-Halo-lit lusetshenziswa ngaphandle, khumbula ukunaka izinkinga ezingangeni manzi, kufanele ukhethe i-Led ekhethekile yangaphandle engenamanzi.Ngakho-ke sicela utshele ukuthi ingabe uphawu lusetshenziselwa ngaphakathi noma ngaphandle uma ufaka i-oda.
6. I-acrylic yomhlangano: i-acrylic efakwe ngemuva kophawu, ukusiza ukukhanya okufanayo.
7. Ukufakwa: Ngokuvamile, sizonamathisela izesekeli kumakhasimende.Sebenzisa izesekeli zokukhweza ezingaphandle kodonga ezivumela isikhala esingu-3-5CM phakathi kwezimpawu nodonga, okuvumela ukukhanya kuphume ngemuva kophawu lwezinhlamvu ezikhanyayo.
I-Exceed Sign Yenza Uphawu Lwakho Ludlule Umcabango.
