3D Back Lighting Stainless Steel Advertising Letters Exceed Led Signage House Number Sign
| Type | Halo-lit Sign |
| Application | Exterior/Interior Sign |
| Base Material | #304 Stainless Steel |
| Finish | Brushed |
| Mounting | Rods |
| Packing | Wooden Crates |
| Production Time | 1 weeks |
| Shipping | DHL/UPS express |
| Warranty | 3 years |
Halo-lit letter sign is a type of LED lit letter sign. For indoor venues, Halo-lit signs are more likely to convey the value of a brand. The Halo-lit sign is commonly used for interior sign because the brightness of Halo-lit sign is soft and not harsh. Generally used in shopping malls, specialty stores, the company logo wall and other places.
The production process of Halo-lit sign:
1. Material cutting: In order to ensure that the interface of Halo-lit sign is smooth, the material must be completely laser cut. Laser cutting is flat and without burrs, and which is more suitable for dealing with small letters. At the same time, the material of Halo-lit sign should choose stainless steel or galvanized sheet that be painted.
2. Grooving: It is necessary to groove the metal edges around the letters and open a 0.6mm notch to facilitate the fitting and welding of the stroke Angle.
3. surface grinding: Because the metal plate placed for a long time is easy to be oxidized, is not conducive to laser welding, so it is best to properly polish before welding.
4. Laser welding: Laser welding the polished metal surface and the perimeter. While welding, the laser point should be aligned with the interface orientation, and the movement of the metal plate should not be too fast to avoid damage.
5. Assemble LED module: Insert glue into the letter sign, then assemble LED module and fix it, and then the letter shell is finished. Pay attention to waterproof: if Halo-lit letter sign is used at the outdoor, remember to pay attention to waterproof problems, should choose outdoor special waterproof Led. So please advise whether the sign is used for indoor or outdoor when place an order.
6. Assembly acrylic: the acrylic installed on the back of the sign, to help uniform lighting.
7. Installation: Generally, we will attach accessories to customers. Use off-wall mounting accessories that allow 3-5CM spacing between the signs and the wall, allowing light to come out from the back of Halo-lit letter sign.
Exceed Sign Makes Your Sign Exceed Imagination.
