I-3D Back Lighting ye-3D ye-Stainless Steel iileta zeNtengiso zigqithise iLed Signage House Number Sign
| Uhlobo | Uphawu lweHalo-lit |
| Isicelo | Uphawu lwangaphandle/Ngaphakathi |
| Izinto ezisisiseko | #304 Intsimbi engatyiwa |
| Gqiba | Ibrashi |
| Ukunyuka | Iinduku |
| Ukupakisha | Iikhreyithi zomthi |
| Ixesha leMveliso | Iiveki ezi-1 |
| Ukuhambisa ngenqanawe | DHL/UPS express |
| Iwaranti | Iminyaka emi-3 |
Uphawu lweleta ye-Halo-lit luhlobo lophawu lwe-LED ekhanyisiweyo.Kwiindawo zangaphakathi, iimpawu zeHalo-lit ziyakwazi ukuhambisa ixabiso le-brand.Uphawu lweHalo-lit lusetyenziswa ngokuqhelekileyo kuphawu lwangaphakathi kuba ukukhanya kophawu lweHalo-lit luthambile kwaye alukho rhabaxa.Isetyenziswa ngokubanzi kwiindawo zokuthenga, iivenkile ezizodwa, udonga lwelogo yenkampani kunye nezinye iindawo.
Inkqubo yokuvelisa uphawu lweHalo-lit:
1. Ukusika izinto eziphathekayo: Ukuze kuqinisekiswe ukuba i-interface ye-Halo-lit sign igudileyo, izinto eziphathekayo kufuneka zinqunywe ngokupheleleyo nge-laser.Ukusika i-Laser kucaba kwaye ngaphandle kwe-burrs, kwaye ifaneleke ngakumbi ukujongana neeleta ezincinci.Ngelo xesha, izinto eziphathekayo ze-Halo-lit sign kufuneka zikhethe insimbi engenasici okanye i-galvanized sheet epeyintiweyo.
2. I-Grooving: Kuyimfuneko ukuba i-groove imiphetho yesinyithi ejikeleze iileta kwaye uvule inotshi ye-0.6mm ukuququzelela ukulungelelaniswa kunye ne-welding ye-Angle ye-stroke.
3. ukugaya umphezulu: Ngenxa yokuba ipleyiti yensimbi ebekwe ixesha elide ilula ukuba i-oxidized, ayihambisani ne-laser welding, ngoko ke kukulungele ukupholisa ngokufanelekileyo phambi kwe-welding.
4. I-Laser welding: I-laser ye-welding yentsimbi ekhazimlisiweyo kunye nomjikelezo.Ngelixa i-welding, i-laser point kufuneka ihambelane ne-interface orientation, kwaye ukuhamba kweplate yensimbi akufanele kube ngokukhawuleza ukuphepha umonakalo.
5. Hlanganisa imodyuli ye-LED: Faka iglue kwisibonakaliso seleta, uze udibanise imodyuli ye-LED kwaye uyilungise, kwaye igobolondo yeleta igqityiwe.Nika ingqalelo ekungangeni manzi: ukuba uphawu lwe-Halo-lit lusetyenziswa ngaphandle, khumbula ukunikela ingqalelo kwiingxaki zokungangeni manzi, kufuneka ukhethe i-Led ekhethekileyo yangaphandle engenamanzi.Nceda ucebise ukuba uphawu lusetyenziselwa ngaphakathi okanye ngaphandle xa ufaka iodolo.
6. I-acrylic yeNdibano: i-acrylic efakwe ngasemva komqondiso, ukunceda ukukhanya okufanayo.
7. Ufakelo: Ngokuqhelekileyo, siya kuqhoboshela izixhobo kubathengi.Sebenzisa izixhobo zokuxhoma ngaphandle kodonga ezivumela i-3-5CM isithuba phakathi kweempawu kunye nodonga, okuvumela ukukhanya kuphume ngasemva kophawu lweleta ye-Halo-lit.
I-Exceed Sign yenza ukuba uphawu lwakho lugqithise kwintelekelelo.
